News

OneUp Components present new EDC Lite tool

16.11.2020
by

OneUp Components are back at it again, presenting a new ‘lite’ version of their popular EDC tool. The new tool features a nine-function multi-tool that lives in your bike, without requiring you to thread your fork steerer. Read on for everything you need to know!

Like it’s stablemate, the OneUp EDC Lite lives in your fork steerer. However, this Lite edition no longer requires you to thread your steerer for assembly.

The new OneUp EDC Lite tool in detail

The new EDC Lite tool from OneUp Components retails for €40 and, according to OneUp, should fit the vast majority of bikes with tapered steerer tubes. Unfortunately, riders who run Giant Overdrive 2 and Cannondale Lefty forks (or forks with carbon steerers) will have to miss out. Installing the EDC Lite should take no longer than 15 minutes and does not require you to remove your start nut or thread your fork steerer, unlike the larger EDC tool in OneUp’s range. Everything that is needed to install the tool is included in the kit.

The multi-tool features all the hex keys you might need, as well as a T25 and flathead screwdriver.

The multi-tool hidden inside the EDC system has all the functions you might need on a standard ride. The kit is claimed to add just 75 grams to your bike, and is available in seven colours. Here are all the specs summed up at a glance:

Nine functions: Hex (2, 2.5, 3, 4, 5, 6, 8 mm), Torx T25, flat head screwdriver
Weight: 75 g total
Price: € 40
Installation: 5-15 minutes, no removal of star nut or threading required

Seven colours are available, allowing you to match your ride.
Installation should take no longer than 15 minutes.

Installing the OneUp Components EDC Lite tool

To install the EDC Lite tool, simply use the included star nut setter bolt to set your star nut 70 mm deeper into your steerer tube. Then, replace your existing top cap with the EDC Lite Carrier, which is essentially a deep-dished top cap that holds the multi-tool in place. The full instructions are available here.

This cross-section shows how the EDC Lite system uses your existing start nut to preload your headset.

Our thoughts on the OneUp Components EDC Lite tool

We have always been a fan of OneUp’s innovative tool storage solutions. However, it is hard to deny that the involved installation probably put a lot of riders off buying the original EDC system. While the new EDC Lite lacks the extra tools found on its bigger sibling, it packs a punch with its nine useful functions and simpler installation. We are looking forward to reviewing one soon!

For more info check out oneupcomponents.com

Did you enjoy this article? If so, we would be stoked if you decide to support us with a monthly contribution. By becoming a supporter of ENDURO, you will help secure a sustainable future for high-quality mountain bike journalism. Click here to learn more.

Words: Photos: OneUp Components

You may also like