If you have been watching the footage of this weekends amazing EWS, you cannot fail to notice that here in Scotland, wheels get a fair amount of abuse! You need to keep tyre pressures down to maintain traction on the often wet trails, and so most keen local riders now run tubeless as a rule! If you ride your bike daily on some of the toughest trails in the UK, your kit needs to be tough too! Boutique is shunned, while reliability and strength are desirable. It may come as no surprise to find out that a huge proportion of ‘in the know’ riders are rolling on Hope Pro 2 Evo hubs.

Hope's new Tech Enduro wheelset has been providing indestructible under some of the UK's roughest riders!
Hope’s new Tech Enduro wheelset has been providing indestructible under some of the UK’s roughest riders!

When it comes to reliability and ease of servicing, Hope hubs have been market leaders for many, many years and it is easy to see why. If you have the right tools you can do a complete bearing change in under 10 minutes and the freehub is easy to keep in good order. If you ride a lot in wet grime and grit then expensive factory wheels are never going to cut it. If you want the best bang for your buck then nothing really comes close to the Hope Pro 2 EVO hubs, twinned with ZTR Flow rims, a bombproof combo run by hardcore riders and bike shop staff all over Scotland.

The Hope Pro 2 Evo hub is legendary, easy to service, simple and well machined!
The Hope Pro 2 Evo hub is legendary, easy to service, simple and well machined!

But that may be changing! Traditionally Hope have steered clear of the rim market, lacing up their hubs into the market leading rim options. However, the design focused company is now keen to reinvent the wheel and are now offering a complete factory wheel-set, the Tech Enduro, retailing at a very competitive £380 for front and rear! The new rims are not manufactured in-house, but the wheels are still designed and hand finished in Barnoldswick.

Adapters are available for all standards and simply pop in without tools!
Adapters are available for all standards and simply pop in without tools!
All the hubs are machined in house!
All the hubs are machined in house!

Word on the grapevine is that Hope’s own gear tester, Adam Brayton has been running these for a while now and has not snapped or folded any. Notorious for his aggressive and ‘full gas’ style, if Adam cannot break these, Hope are onto a winner

Simple graphics give a nice clean look to the rims!
Simple graphics give a nice clean look to the rims!
Sapim Race Spokes help keep the weight down!
Sapim Race Spokes help keep the weight down!
The rims have a 23mm internal width and are welded and eyeleted 6061 T6 Aluminium
The rims have a 23mm internal width
and are welded and eyeleted 6061 T6 Aluminium

We have just received this 27.5 wheel set for testing and will be putting them through the worst abuse we can dish out. With the race season kicking off, these should get a few big wallops, so we will be reporting back in a few months with a full review to let you know how they perform.

  • 23mm internal width
  • Welded and eyeleted 6061 T6 aluminium rim
  • Triple cavity construction for added strength
  • Black Sapim Race stainless steel double butted spokes
  • Silver Brass nipples
  • Standard hubs available in Black, Silver, Blue, Red, Gunsmoke and Purple
  • Straight pull hubs only in Black
  • Front wheels supplied with QR and 15mm conversions included (9 and 20mm conversions available separately)
  • Rear wheels supplied as 135mm QR (135×12 and 142x 12 conversions available separately)
  • 32 hole Pro 2 EVO hubs
  • 4 Pawl ratchet mechanism
  • Stainless Steel, sealed cartridge bearings
  • Weights for rim only 26″-490g, 27.5″-510g, 29″-540g
  • Words and photos: Trev Worsey


    Did you enjoy this article? If so, we would be stoked if you decide to support us with a monthly contribution. By becoming a supporter of ENDURO, you will help secure a sustainable future for high-quality mountain bike journalism. Click here to learn more.